Sales and Marketing Tip – Be Sure Your Customer Has All the Components They Need

Components Array

When selling a FUELAB Prodigy Series Fuel Pump, be sure to discuss the other components your customer will need for their fuel system. A proper pre-filter, post pump filter, check valve, and fuel pressure regulator are recommended.

Pre-Filter

Often called “Straining Filters”, these coarse filters are responsible for preventing debris in the fuel from being able to lock-up or damage the fuel pump. The filters are typically very coarse in nature, particularly in high flow applications. This filter is coarse, not just to reduce pressure drop, but to ensure that fine debris will not begin to block flow over time. FUELAB uses a 75 micron rating for its straining filters (including the in-tank filter Model 83801). FUELAB also recommends the filter rating be between 75 and 150 microns for the “Pre – Pump” filter, when using FUELAB pumps.

Post-Filter

The “Post – Pump” filter is typically the filter that is replaced on vehicles as part of normal maintenance, while straining filters are typically installed inside the fuel tank itself (and not a part of normal maintenance). Considerations for this filter include:

  • Fuel Type.  Filter material or media can have compatibility issues.  Use of fuels like E-85 can causes problems with normal “paper” filters.  Be sure that the filter you use is compatible with the fuel you intend to use.
  • Filtration.  The micron rating relates to the size of the particle that is blocked (or stopped, depending on the type of rating).  The finer (smaller the value) the filter is, the smaller the particles of debris that get filtered.
  • Capacity.  Filters can have two ratings with respect to capacity.  Sometimes they are given a general flow rating, or simply demonstrate the total filter surface area.  It may be obvious, but worth noting:  In general the larger the filter is, the larger the capacity.  Having larger filters can help reduce maintenance frequency as well as improve flow capacity.

Check Valve

Typically only beneficial for EFI fuel systems, these valves help maintain fuel pressure in the fuel rail after the pump and injectors shut down. This gives two advantages:

  • Maintain pressure during engine cooling to help prevent vaporizing of fuel in rail (reduce evaporative emissions). This has an additional benefit of maintaining liquid fuel in the rail, the next time the engine is started.
  • Aid in keeping pressure during engine starting, required in some applications that turn off fuel pump during engine starting or cranking.

Check valves allow fuel to pass through in one direction, while preventing flow in the opposite direction. In order to maintain pressure, the fuel pressure regulator and fuel injectors must also have very low, or no appreciable internal leakage. While most aftermarket check valves are not methanol or ethanol compatible, all FUELAB Check Valves are effective for gasoline, diesel, methanol, ethanol and other oxygenated fuels. To make plumbing simpler, and reduce overall system costs, FUELAB has designed check valves integrated with the filter assembly. The integration gives an advantage of having a check valve that is protected by the filter, and reduces the number of components required to plumb the fuel system. All check valves must be used downstream of the fuel pump, to avoid cavitation. Options include

  • 848xx Series – for -6AN and -8AN sizes (our standard flow) / 3″L Filter Elements
  • 858xx Series – for -8AN and -10AN size (our high flow) / 5″L Filter Elements
    • FUELAB recommends the 858xx Series Filter/Check valve model for all systems with pump ratings over 105 GPM.

The replaceable or cleanable filter elements can be tailored to your customer’s fuel requirements, including filter elements that are appropriate for pump and racing gasoline, E-85 or Methanol.

Fuel Pressure Regulator

Precise fuel pressure regulators are a necessary component for proper function of a modern fuel delivery system. FUELAB offers a variety of high-performance pressure regulators for carbureted and EFI systems, in blocking and return style configurations. Discuss with your customer the goals and intended use of their fuel delivery system to determine which style, and particular regulator model, is best for them. An overview of fuel pressure regulator styles and function can be seen at: http://fuelab.com/fuel-pressure-regulators-low-pressure-applications/ . If needed, the FUELAB technical support department is at the ready to help you determine the best regulator option for your customer.

Share

FUELAB Prodigy Model 41404 Carbureted Inline Fuel Pump – Cutting Edge Design with a Built-In Bypass Valve

41404 Pump

The FUELAB Prodigy Model 41404 Carbureted Inline Fuel Pump was developed for racing, features a brushless motor for long-life and reliability, and can provide fuel for up to 1800HP. Model 41404 is a carbureted inline fuel pump featuring a built-in bypass valve – truly a cutting edge design. The bypass feature allows for a shorter and narrower (-6 size) fuel return line, and the pump’s inline configuration allows for a more clean and compact plumbing set-up than that of a “T-style” pump. Model 41404 is speed controllable to keep fuel cooler, and help avoid vapor lock and cavitation damage. This feature also enables the pump to be used on street driven vehicles. Compatible with Gasoline, E85, and Methanol fuels. For more information go to: http://fuelab.com/products/performance/prodigy-fuel-pumps/

 

Fuelab 585xx Series Fuel Pressure Regulators Provide Racers with Ultimate Performance and Reliability

Fuelab 585xx Series Fuel Pressure Regulators585xx Series Regulator Cut-Away Final copy

Collinsville, IL – Fuelab, the leaders in fuel delivery innovation, announce their latest development in superior fuel pressure regulator performance and reliability. Fuelab 585xx Series Fuel Pressure Regulators combine advanced features and increased functionality to provide the ultimate precision instrument for fuel pressure regulation. The four outlet port regulators are engineered to deliver extremely high flow rates and a flattened curve for pressure stability. Featuring an anodized billet aluminum body, the regulators use an aerospace poppet valve design to provide smooth regulating capability and maximized flow. They operate within a 4-10 psi pressure range, and an adjustment mechanism with fine thread pitch allows for precise fuel pressure adjustment. A methanol and E85 compatible soft seat avoids fuel pressure creep. This main seat assembly can be quickly exchanged in case of seat damage such as debris, and can be disassembled for replacement of the o-rings in the soft-seat design.  Features dual 10AN inlet ports, and four 6AN outlet ports arranged inline for cleaner installation, and with port spread that allows for smooth fuel flow when using an 8AN line size. Fuelab 585xx Series Fuel Pressure Regulators are perfect for single stage and multi-stage nitrous applications, and are compatible with gas, diesel, methanol and E85 fuels.