FUELAB’s Innovative New Products for ’94-’98 Dodge Cummins!

FUELAB Velocity 200 Lift Pump - 30308

FUELAB, manufacturers of the most innovative fuel delivery products in the automotive aftermarket, is pleased to introduce high performance lift pumps, and lift pump installation kits for 1994-1998 Dodge Cummins 12 Valve Engines. These products exemplify the quality, performance and reliability that FUELAB is known for.

FUELAB Velocity Diesel Lift Pumps for 1994-1998 Dodge Cummins 12 Valve Engines

FUELAB Velocity In-Line High Performance Lift Pumps are now available for 1994-1998 Dodge Cummins 12 Valve Engines. Velocity pumps supply the increased fuel demands of engines modified for more power, and are offered in 200 GPH (Velocity 200 – Model #30308 – Supports up to 1800 HP) or 100 GPH (Velocity 100 – Model #30307 – Supports up to 500 HP) versions. Engineered as a premium quality, powerful, speed controllable and reliable replacement for the OE Dodge lift pump. Feature brushless motors for long life and low current draw, as well as a flow through design for cool operation. An aerospace design based poppet relief valve provides stable fuel pressure to the injector pump, and no dynamic shaft seals ensure reliability. FUELAB’s Vortex air separation and water/filtration system protects fuel injectors and provides pure fuel to engine. Pumps are quiet, install easily and use standard replacement filter elements. Hand-built in the USA. See how relief valve design affects fuel pressure and flow at http://fuelab.com/forums/topic/diesel-lift-pumps-what-is-more-importantpressure-or-flow/

FUELAB Performance Lift Pump Installation Kits for 1994-1998 Dodge Cummins 12 Valve Engines

FUELAB Performance Installation Kits provide all the parts needed for a professional quality installation of FUELAB Velocity In-Line Performance Lift Pumps in 1994-1998 Dodge trucks with the Cummins 12 Valve Engine. Only the highest quality parts are used, including fuel rated hose, custom wire harnesses, multiple vehicle year plumbing components, clamps, and draw straws. The Performance 100 Installation Kit (Model #20107) is used to install Velocity 100 In-Line High Performance Lift Pumps (Model #30307), and includes 3/8” fuel line. The Performance 200 Installation Kit (Model #20108) is used to install Velocity 200 In-Line High Performance Lift Pumps (Model #30308), and features 1/2” fuel line.

Share

Diesel Lift Pumps – What is More Important…Pressure or Flow?

Written by Matt Gilmore

There seems to be a lot of confusion on this subject.  You must have adequate flow to support the needs of the engine.  What about pressure?  Is pressure just a product caused by the resistance to flow?  Is pressure necessary?  Does a drop in pressure at wide open throttle mean I don’t have enough flow?

Sizing a lift pump with adequate flow is the first step.  You need enough flow to support the type of injection system you are running.  Sizing by horsepower will get you in the ballpark, but ultimately your injection system has to be taken into consideration.  Going off horsepower alone is not enough information.

Pressure exists due to a resistance in flow.  When it is put that way, it sounds like a bad thing.  However, pressure is necessary for a fuel system.  Many fuel injection pumps rely on fuel pressure to operate the timing circuit.  All fuel systems benefit from pressure during high demand situations.  A diesel engine running at 3000 RPM has very little time to fill a pumping element before the next cycle…milliseconds, literally.  Pressure helps to fill the pumping element.  If pressure drops too far, the pumping element will pull a vacuum.  It will live with some vacuum, but too much will cause cavitation and vaporization.  This condition can cause more damage than dirty fuel.  In layman’s terms, cavitation causes the fuel to vaporize.  The vapor fills the pump cavity; then the pump pressurizes the vapor.  When the vapor is compressed, it implodes.  The implosion erodes the metal away and leaves craters in the surface.

A quality fuel pressure gauge at the inlet of the injection pump should be used in all high performance applications.  This is a cheap and simple way to monitor fuel system needs.

What causes pressure drop at WOT?  The first thing that usually comes to mind is the lift pump won’t keep up.   That, however, is usually the incorrect answer.

Many things can cause low pressure.  The fuel pressure relief valve (what regulates the pressure) is one that is often overlooked.  Not all relief valves are the same.  Even if they look identical, there can be minor differences that have a major impact on valve performance.  Spring selection is one common mistake with budget relief valves.  There is no “one size fits all” in this category.  You cannot take an 8 PSI relief valve and simply shim the spring to 18 PSI.  It can be set to run at 18 PSI, but it will be erratic and drop off in pressure, under wide open throttle.  A quality relief valve will run steady pressure at idle and maintain that pressure at cruising speeds.  A full throttle run should have a minimal amount of pressure drop.

It should be noted that fuel pressure relief valve poppet design can have a major impact on fuel pressure and flow. The Ball Shaped Poppet is commonly used, however, this is a flawed design as the ball can vibrate (also known as “valve chatter”), which inhibits smooth fuel flow and creates fuel pressure spikes. A Cylindrical Shaped Poppet provides a superior design, as the diameter of the upper portion of the poppet is stabilized within the bore of the valve housing. The poppet smoothly slides open and closed along the bore. This combined with the inlet ports on the side of the poppet smooths fuel flow, and valve chatter is virtually eliminated.  This reduces fuel pressure spikes and results in a much better fuel flow curve.

Relief Valve Comparison with Names

Pressure versus flow, they are both important.  While flow is a necessity, pressure with good regulation is vital to a quality fuel system.