Home Forums Customer Support 2000 3.4liter v6 Toyota Tacoma

This topic contains 1 reply, has 1 voice, and was last updated by  Josh@Fuelab 3 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • September 18, 2014 at 1:42 am #4443

    Scott Connors

    Which fuel filter is right for my trucj.



    September 18, 2014 at 1:30 pm #4444


    None of the filters are going to be bolt-on. They are meant for a performance application where AN fittings are used. If you’re still using the factory sized fuel lines, the 818 series filter with -6AN fittings and the 10 micron filter element (if you’re using pump gas) would be fine. The part number is 81801. But like I said, there will be some adapter fittings that you’ll need to purchase elsewhere in order to complete the install.

    There is a dealer locator on our website under a tab labeled “Dealer Map”. Most of the large mail order performance suppliers carry our line as well (Summit, Jegs, etc.).

    Let me know if you have any other questions.




Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: 2000 3.4liter v6 Toyota Tacoma
Your information:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>